CPSC Material Change
A post-certification change in a US children's product that could affect compliance; assess design, process and component sourcing before selecting the testing boundary.

On this page · 5 sections
01What CPSC material change means
For US children's products after initial certification, a material change is a change in design, manufacturing process or component sourcing that a manufacturer exercising due care knows, or should know, could affect compliance with applicable requirements. The binding definition in 16 CFR 1107.2 concerns a possible compliance effect, not an established failure. This entry addresses that post-certification decision, rather than change management for every category of consumer product.
For US children's-product manufacturers, due care under 16 CFR 1107.2 means the care a prudent and competent person in the same business would exercise under similar circumstances; it does not permit willful ignorance. A practical assessment therefore asks what is known about the change, what remains uncertain and whether the uncertainty concerns a compliance-relevant characteristic.
Practice: a useful change-control assessment separates the description of the change from its possible effects. A purchasing description may explain who supplies a component without explaining whether its composition or manufacturing history has changed. Likewise, an unchanged drawing may say little about a revised assembly process. Organize the review around possible compliance effects rather than price, purchasing category or visual prominence. The resulting assessment should make its reasoning understandable to someone who did not participate in the change.
02Connect the change to the evidence
For US children's products, 16 CFR 1107.23(b) includes component composition, interaction and functionality when assembled within product design. For US children's-product component sourcing, 16 CFR 1107.23(d) addresses replacements that could affect compliance, including changes in composition, supplier or the component obtained from the same supplier.
Official guidance: for US children's products, the CPSC Material Change Testing FAQ explains that the manufacturer, facility, equipment, processes and process controls may influence the likelihood of compliance. This guidance helps explain why a review focused only on a component's commercial name can miss relevant manufacturing differences.
Practice: the following evidence map is an assessment aid, not a prescribed form or test protocol. Each row connects a question to information that can help bound the review. An information gap is worth naming explicitly: it shows where the reasoning stops, rather than silently turning an assumption into a finding.
Practical evidence map for assessing possible effects and test scope
| Assessment question | Useful evidence | How the evidence informs test scope |
|---|---|---|
| What changed in the design? | Before-and-after drawings, component descriptions and an explanation of changed functions. | Locates the affected characteristics and distinguishes a local alteration from a change involving several parts. |
| What changed in how the product is made? | Process-revision history, affected operations and a comparison of assembly conditions. | Shows whether the review concerns a component alone or characteristics created during assembly. |
| What does the source change actually replace? | Supplier notification, component identity, composition comparison and relevant manufacturing information. | Helps distinguish a commercial identifier change from a change with unresolved compliance effects. |
| Could the change affect another component or the assembled product? | An assessment of interfaces, interactions and functionality, linked to the applicable compliance questions. | Supports or challenges a proposed component-only testing boundary; unresolved interactions remain visible. |
A useful evidence comparison states both its reach and its limits. For example, a drawing comparison may address geometry but not establish composition equivalence. A supplier notice may identify a replacement source but not establish what happened during manufacture. Treat these documents as complementary pieces of the assessment, rather than interchangeable proof.
03Determine the testing boundary
Following a material change in a US children's product, 16 CFR 1107.23(a) requires testing sufficient samples by a third party conformity assessment body and issuing a new Children's Product Certificate (CPC). For that US children's product, the same provision prohibits issuing the new CPC until the product meets the applicable children's-product safety rules.
For US children's products, 16 CFR 1107.23(a) permits a testing basis combining earlier third-party certification tests with third-party test results for the changed component when the change is limited to that component and does not affect other components' or the finished product's ability to comply with other applicable children's-product safety rules. This is a conditional route, not a general exemption for changes described as component changes.
For US children's-product component testing, 16 CFR 1109.5(a)(1) and (c) condition reliance on component testing being required or sufficient to assess the relevant compliance, and prohibit using component tests where a rule requires finished-product testing. For US children's products, paragraph (a)(1) also says doubts about component-testing sufficiency should be resolved in favor of testing the finished product.
For US children's products, 16 CFR 1107.23(a) requires due care to ensure that a component undergoing component-level testing is identical in all material respects to the component on the finished product. For US children's-product component testing, 16 CFR 1109.4(i) defines that identity through the absence of differences with respect to compliance. A practical identity comparison therefore concerns more than matching catalogue numbers.
For US children's-product certification testing, the laboratory definition in 16 CFR 1107.2 requires CPSC-accepted accreditation and a scope covering the applicable required tests. For US children's-product certification testing, 16 CFR 1107.20(a) ties sample sufficiency to a high degree of assurance; it does not prescribe a universal numerical sample count.
Practice: state the proposed testing boundary alongside the reasoning that supports it. Identify the changed characteristics, the compliance questions they could affect and the earlier reports proposed as the unaffected basis. A report's existence and its relevance are separate questions. This makes a narrow testing proposal reviewable without treating historical evidence as a blanket answer to every new configuration.
04Worked comparison: similar paperwork, different open decisions
These fictional practice examples assume an initially certified US children's product. They compare qualitative evidence; no product-specific rule, numerical limit or sample quantity is assumed. The competent assessment in the component-limited example is a stipulated fact, not a conclusion inferred merely from the existence of earlier reports. None of the examples establishes that a product complies.
Fictional changes and the evidence needed to determine their testing boundaries
| Case | Change | Evidence available | Missing evidence | Potential test scope | Decision |
|---|---|---|---|---|---|
| MC-A | The supplier announces a different source for a component that retains the same catalogue identifier. | The identifier is unchanged and the supplier has announced the source change. | Composition and process comparisons, plus a tested-to-used identity comparison. No product-specific rule is identified. | Undecided. The unchanged identifier does not establish which compliance questions are unaffected. | There is not enough evidence to determine the effect. Obtain the comparisons before concluding that the change has no compliance significance or selecting a narrow testing boundary. |
| MC-B | A change is limited to a component. | A competent assessment stipulates no effect on other components or finished-product compliance with other applicable rules. Earlier third-party reports exist. | Changed-component test results and evidence connecting the tested component to the component used in the finished product. | A changed-component-only route is possible under the stated assessment, with earlier third-party tests forming the unaffected basis. | The component-limited route remains conditional. The missing results and identity evidence prevent a compliance conclusion. |
| MC-C | An assembly-process revision changes how components interact. | Earlier single-component reports exist, but the revised interaction's effect on finished-product compliance has not been evaluated. | An interaction assessment and a decision identifying the applicable rules and resulting testing scope. | Assess finished-product effects before deciding whether component evidence is sufficient or finished-product testing is needed. | The interaction question remains open. Earlier single-component reports do not resolve the unevaluated assembled-product effect. |
The comparison separates uncertainty about what changed from uncertainty about what the change does. The source-change example lacks a reliable before-and-after comparison. The component-limited example has an assessed boundary but lacks the evidence needed to complete that route. The assembly example has historical results at a level that does not answer the new interaction question. Treating all these situations as the same supplier-document problem would obscure their different next steps.
05Preserve the reasoning and its evidence links
For US children's-product manufacturers subject to applicable children's-product safety rules, 16 CFR 1107.26(a)(5) requires records describing all material changes in design, manufacturing process and component sourcing, together with the certification tests run and their test values. For those US children's-product manufacturers, 16 CFR 1107.26(b) requires retaining the records specified in paragraph (a) for five years.
For US children's-product component testing, 16 CFR 1109.5(f) prohibits reliance on testing procured by a testing party or another certifier unless the relevant components or finished products are traceable.
Practice: keep the change description, affected configurations, comparison documents, assessment reasoning and relevant test reports connected. A reviewer should be able to move from the changed component or operation to the reason for the selected testing boundary, then to the evidence supporting that reason. Lot genealogy can help connect the component used with the affected finished-product population; the assessment narrative explains why that relationship matters.
For an unresolved assessment, preserve the missing question as carefully as the documents already collected. For a completed assessment, distinguish the conclusion from the assumptions on which it depends. This practical distinction makes later information easier to evaluate: a new supplier disclosure may challenge an assumption even when the earlier report itself has not changed.
Frequently asked questions
Q.Does an unchanged catalogue number settle the assessment?+
No. As the comparison above illustrates, continuity of an identifier is not a comparison of composition, process or tested-to-used identity. In practical review, use the identifier to locate the relevant information, not to substitute for it. A useful supplier response explains what the identifier now represents and how that differs from the earlier component.
Q.How should an unresolved assessment be recorded?+
Practice: name the unanswered question, the evidence needed to answer it and the person responsible for obtaining or evaluating that evidence. Distinguish an unknown effect from an assessed absence of effect. Avoid a general pending label that leaves the next reviewer unable to tell whether the gap concerns component identity, interactions or test results.
Q.What role can a supplier's CoC play?+
Treat a supplier's certificate of conformity as a document to evaluate, rather than the name of the assessment decision. A practical review identifies the component and condition it describes, the underlying results it references and its relationship to the changed configuration. This helps separate useful supporting information from a broad assurance that does not answer the particular change question.
Q.What if a change causes a safety rule to stop applying?+
For US children's products, 16 CFR 1107.23(a) states that changes causing a children's-product safety rule to no longer apply are not material changes for that ceased rule. Practice: record the reason for that applicability conclusion separately from the assessment of any effects on other applicable rules.
Primary sources
- 16 CFR 1107.2 — eCFR version as of 30 October 2026
- 16 CFR 1107.20 — eCFR version as of 30 October 2026
- 16 CFR 1107.23 — eCFR version as of 30 October 2026
- 16 CFR 1107.26 — eCFR version as of 30 October 2026
- 16 CFR 1109.4 — eCFR version as of 30 October 2026
- 16 CFR 1109.5 — eCFR version as of 30 October 2026
- CPSC Material Change Testing FAQ — retrieved 3 November 2026
Further reading
Want to see how CPSC Material Change could fit into your own records and workflows? Explore the related V5 pages or talk to our team about what applies to your operation.
