Incoming Inspection
A documented check of received materials against expected identity and site-approved criteria before deciding whether they can enter usable stock.

On this page · 6 sections
How does Incoming Inspection apply to your shop floor?
Pick your industry and scale — Ask V5 rewrites the definition in your context, gives a worked example, and shows what V5 does on day one.
01What incoming inspection means
Incoming Inspection is a documented check of a received consignment against its expected identity and applicable acceptance criteria before a usable-stock decision. It can apply to raw materials, ingredients, packaging, components and finished goods received for further distribution. The checks depend on the material, its intended use and the site-approved specification—not on a particular recording technology.
Inspection is part of receiving, but it answers a different question. Receiving establishes what arrived; inspection establishes what the available evidence shows about conformity. An authorized disposition then records accept, reject or hold. A delivery can be counted and acknowledged while some or all of its contents remain unavailable for use.
02What to check and record
Start with the expected identity, the site-approved criteria and the revision applicable to the receipt. Define the inspection method and any sampling or testing through the site's approved procedure. Record observations against those criteria rather than relying on an unexplained “looks acceptable.”
| Check | Expected basis | Evidence or action to record |
|---|---|---|
| Receipt identity | Order or delivery reference, supplier, material description and relevant lot or handling-unit identifiers | What arrived, which units were checked and any mismatch between the material, its markings and the documents |
| Criteria and revision | Site-approved specification and inspection instruction applicable to the material and intended use | Document identifiers and revisions; resolve a missing, conflicting or superseded instruction before deciding |
| Container and product condition | Condition criteria per site-approved specification | Observed damage, contamination indicators or other specified defects; distinguish container findings from product findings |
| Temperature, when applicable | Product- and shipment-specific requirements, separating safety controls from quality specifications | Actual reading and units, method, instrument identity, time and exact measurement location; distinguish product measurements from vehicle-air observations |
| Supporting evidence | Documents, examination results or test results required by the site-approved procedure | Evidence reviewed, its link to the receipt, missing information and the person responsible for follow-up |
| Quantity reconciliation | Expected and physically received count or mass | Record shortages, excesses and unit conversions separately from inspection findings; received quantity is not accepted quantity |
03From findings to an authorized decision
Keep material awaiting a decision identified and segregated under the site's approved holding conditions. Record the scope of an exception: a particular container, handling unit, lot or the whole consignment. Do not assume that a finding is isolated—or that it affects everything—without assessing the available evidence.
- Identify the receiptConnect the received material and handling units to their expected identity.
- Check approved criteriaUse the applicable specification revision and record observations and supporting evidence.
- Control pending stockKeep stock awaiting decision identified and segregated; document gaps and exceptions.
- Authorize accept, reject or holdA designated person evaluates the evidence, intended use and applicable requirements.
- Record and apply the statusIdentify the affected stock, decision-maker, time, reason and permitted next action.
- Accept: authorize the identified material for the stated use when the required evidence supports the site-approved criteria.
- Reject: record why the material is not accepted for the stated use and control it pending an authorized next step.
- Hold: keep the decision unresolved while specified evidence, investigation or assessment is outstanding; assign the next action and its owner.
The disposition record should connect the receipt and affected units to the criteria revisions, inspection results, exceptions and supporting evidence. Record who made the decision and when. If a hold is later resolved, retain the earlier status and the basis for the change. Completing a checklist or reconciling a delivery quantity does not itself authorize use.
04Selected U.S. requirements and their limits
This summary uses selected eCFR paragraphs as of 26 October 2026, not a complete legal review. A site must determine which requirements apply to its activities. It should not infer its regulatory status from a description such as “packhouse.”
Food: first establish whether Part 117 subpart B applies
Section 117.5(k)(1) lists exclusions from subpart B, including farms as defined in § 1.227 and establishments solely engaged in holding and/or transporting raw agricultural commodities. Those exclusions are subject to § 117.5(k)(2). This entry does not determine whether a particular operation is a farm. FDA's Produce Safety overview discusses farm definitions and enforcement discretion for certain entities; no conclusion about that policy's coverage is drawn here.
Where Part 117 subpart B applies:
- Section 117.80(a)(1)-(2) requires adequate sanitation principles for operations including receiving, inspecting and segregating, and appropriate quality control operations to ensure food is suitable for human consumption and food-packaging materials are safe and suitable.
- Section 117.80(b)(1) requires raw materials and other ingredients to be inspected and segregated or otherwise handled as necessary to ascertain that they are clean and suitable for processing into food. Their storage must protect against allergen cross-contact and contamination and minimize deterioration.
- Section 117.80(c)(2)-(3) requires conditions and controls that minimize the potential for microorganism growth, allergen cross-contact, contamination and deterioration. Its temperature provision concerns food that can support rapid growth of undesirable microorganisms and requires temperatures that prevent adulteration during manufacturing, processing, packing and holding.
Sanitary transportation: coverage and the receiver's role
Section 1.900(a) applies to shippers, receivers, loaders and carriers engaged in transportation operations, excluding non-covered businesses as defined in § 1.904 and subject to § 1.900(b). The defined scope also matters: § 1.904 excludes transportation activities performed by a farm from “transportation operations.” Establish coverage before applying the following duties.
For a covered receiver, § 1.908(d) applies upon receipt of food that requires temperature control for safety under the conditions of shipment. The receiver must take steps to adequately assess that the food was not subjected to significant temperature abuse. The paragraph gives examples including determining food temperature, vehicle ambient temperature and temperature setting, and conducting a sensory inspection. This is not a blanket instruction to temperature-check every produce delivery.
Guidance is distinct from law
The 1998 FDA/USDA produce guide is voluntary guidance, not a regulation. Its packing and transportation sections recommend inspecting containers for damage, cleaning pallets and containers before using them to transport produce, evaluating sanitation wherever produce is transported and handled, and checking trucks or transport cartons for cleanliness before loading. Only its container, sanitation and transport recommendations are used here, not its Part 110 references.
A brief drug-regime contrast
For drugs, § 211.80(a) requires written procedures covering receipt, identification, storage, handling, sampling, testing and approval or rejection of components and drug product containers and closures. Section 211.84(a)-(b) withholds each lot from use until appropriate sampling, testing or examination and release by the quality control unit; it also requires representative samples of each shipment of each lot, with sampling amounts based on appropriate criteria. These are contrasting drug requirements, not food receiving law.
05Hypothetical exercise: one produce receipt
Receipt R-EX-01 lists three handling units—A, B and C—of whole apples for further distribution. The paperwork identifies Supplier EX and lot L-EX. The hypothetical site's approved receipt instruction RI-EX revision C identifies the required identity, condition and supporting-evidence checks; its approved quality specification Q-EX revision B defines the ordered grade. Keep all three units identified and segregated pending an authorized decision.
For this exercise only, RI-EX also requires an arrival temperature observation for quality using a product-contact probe method approved in TM-EX revision A. Record the actual reading and units, instrument identity, method, time and measurement position. An entry for A could identify 09:15, receiving bay R, unit A/carton A-1 and the product-contact point specified by TM-EX. Leave the result blank until measured. No temperature limit or safety-temperature requirement is inferred from this exercise.
- Unit A: identity matches the paperwork, containers and product meet the applicable condition criteria, and all required supporting evidence is available. For the exercise, assume every required site-approved check is satisfactory for the intended use.
- Unit B: identity is confirmed and containers are intact, but the observed bruising does not meet the ordered grade under Q-EX revision B. Treat this as a quality-specification exception, not a finding that the food is unsafe.
- Unit C: container damage obscures the lot marking. The document-to-unit identity cannot be confirmed, and the container/product condition assessment needs follow-up.
Reader task: propose accept, reject or hold for each unit, identify the evidence behind the proposal and name the next action. Assume the site's assessment supports treating the units separately; reassess the affected scope if further evidence suggests a shared problem.
- A — an authorized person may record accept on the stated exercise assumptions, linking the decision to the required evidence and applicable revisions.
- B — an authorized person may record reject for the ordered grade, stating the quality basis and controlling the unit pending the next authorized step.
- C — record hold, preserve segregation and assign follow-up to establish identity and assess the damaged container and product before any further disposition.
Record the actual authorized decisions, not just the reader's proposals. The quantity record still shows three handling units received; it does not show three units accepted.
06What an incoming inspection does not prove
- Customer grade and food-safety suitability are different questions. Passing a grade specification is not proof of safety; failing it does not by itself establish that food is unsafe.
- One arrival temperature reading describes the measurement made at that time and location. It does not establish conditions throughout the journey or demonstrate the absence of microorganisms.
- An inspection or sample provides evidence within its defined scope. Do not describe acceptance as a guarantee that every unit is free from every possible defect.
- A missing document, ambiguous identifier or unresolved exception should remain visible in the record. Do not replace missing evidence with a presumption of conformity.
- Count and mass reconciliation answer how much arrived. They remain separate from the decision about which material may be used.
Frequently asked questions
Q.Is incoming inspection the same as receiving?+
No. Receiving establishes what arrived and its quantity. Incoming inspection compares the received material and its evidence with expected identity and criteria. The authorized accept, reject or hold decision can remain pending after receipt is recorded.
Q.Who should authorize accept, reject or hold?+
Use the person or role authorized by the site's procedure, subject to any applicable regulatory requirements. Record the decision-maker, time, affected material and evidence-based reason. An inspector's completed checklist is not automatically authorization to use the stock.
Q.What should happen if the lot marking or required evidence is missing?+
As a practical control, keep the affected material identified and segregated on hold while the gap is investigated. Record exactly what is missing, the affected units, the follow-up owner and the evidence needed for a further decision. Do not silently substitute the paperwork for an unconfirmed physical identity.
Q.Does every incoming material need a temperature check?+
Do not assume so. Establish whether temperature is relevant to the material, intended use and shipment, and distinguish a safety control from a customer quality specification. When a check is applicable, use the site-approved method and record the result, units, instrument, time and measurement location.
Q.Does a failed customer grade mean that food is unsafe?+
Not by itself. Record the grade failure against the applicable quality specification and assess food-safety suitability separately. A commercial acceptance decision cannot substitute for a required safety assessment.
Q.How should an incoming-inspection sampling plan be chosen?+
Use the site's approved plan for the material and inspection purpose, taking account of relevant risks and applicable requirements. Record what was examined and the plan revision. This definition supplies no universal sample quantity or acceptance quota.
Q.Can the inspection record be kept on paper?+
This definition does not prescribe a recording medium. Use the site's approved paper or electronic method, keeping the observations, evidence, revisions and authorized disposition legible, connected to the receipt and retrievable. The medium alone does not establish conformity.
Primary sources
- 21 CFR 117.80(a) — general processes and controls; selected text as of 26 October 2026
- 21 CFR 117.80(b) — raw materials and other ingredients
- 21 CFR 117.80(c)(2)-(3) — manufacturing, packing and holding controls
- 21 CFR 117.5(k) — exclusions from subpart B and qualification
- 21 CFR 1.900 — sanitary transportation applicability
- 21 CFR 1.904 — sanitary transportation definitions
- 21 CFR 1.908(a) — general transportation requirements, including possible material failure
- 21 CFR 1.908(d) — receiver assessment for food requiring temperature control for safety
- 21 CFR 211.80(a) — written procedures for drug components, containers and closures; comparison only
- 21 CFR 211.84(a)-(b) — drug sampling and quality control unit release; comparison only
- FDA/USDA 1998 produce guide — voluntary guidance; preface, packing sanitation and transportation sections
- FDA Produce Safety overview — limited context on farm definitions and enforcement discretion
Further reading
Want to see how Incoming Inspection could fit into your own records and workflows? Explore the related V5 pages or talk to our team about what applies to your operation.
