FSIS Appendix BFSIS Stabilization Guideline for Meat and Poultry Products (Revised Appendix B)
FSIS Appendix B — now the FSIS Stabilization Guideline for Meat and Poultry Products — is USDA guidance on cooling and hot-holding cooked meat and poultry so spore-forming bacteria cannot grow.

On this page · 5 sections
How does FSIS Appendix B apply to your shop floor?
Pick your industry and scale — Ask V5 rewrites the definition in your context, gives a worked example, and shows what V5 does on day one.
01What is FSIS Appendix B?
"Appendix B" is the name the meat industry still uses for USDA FSIS's guidance on stabilization — cooling and hot-holding heat-treated meat and poultry. It first appeared as Appendix B to a 1999 compliance guideline. The current version is the FSIS Stabilization Guideline for Meat and Poultry Products (Revised Appendix B), document FSIS-GD-2021-13, issued in December 2021.
The guideline covers heat-treated ready-to-eat (RTE) and not-ready-to-eat (NRTE) meat and poultry products. Its focus is spore-forming bacteria — especially Clostridium perfringens and Clostridium botulinum — whose spores survive cooking and can grow if product cools too slowly.
02Which regulations Appendix B relates to
FSIS links the guideline to 9 CFR 318.17(a)(2), 318.23(c)(1), 381.150(a)(2), 381.150(b) and Part 417 (HACCP). The stabilization performance standards for certain cooked products call for no multiplication of toxigenic microorganisms such as C. botulinum and no more than 1 log growth of C. perfringens.
Under 9 CFR Part 417, every establishment must support the decisions in its HACCP plan. Citing an FSIS guideline such as Appendix B, and following it exactly, is one of the most common ways to provide that support for cooling.
03Appendix B cooling options
The guideline sets out several cooling options. The best known are summarised below; each has conditions, so read the guideline before using one as support.
| Option | Summary of the time-temperature limits |
|---|---|
| Option 1 | Product cools from 130°F to 80°F within 1.5 hours, and from 80°F to 40°F within 5 hours |
| Option 2 | Chilling begins within 90 minutes after cooking; product cools from 120°F to 55°F within 6 hours, then continues to 40°F before shipping |
| Cured products option | For products cured with nitrite at the levels set in the guideline: 130°F to 80°F within 5 hours, and 80°F to 45°F within 10 hours |
The guideline also covers hot-holding (keeping product hot enough to prevent growth) and explains how to handle cooling deviations, including evaluating them with predictive models and supporting data.
04Records Appendix B cooling needs
- Monitoring records of product internal temperature at defined points and times through cooling.
- Calibration records for the thermometers or probes used.
- The written support document (the guideline and any validation data) cited in the HACCP plan.
- Deviation records: what went out of limits, the product affected, the evaluation and the disposition.
- Verification records showing someone reviewed the monitoring records.
Inspectors look for the link between the critical limit in the HACCP plan, the cited support and the monitoring records. If the plan cites Option 1, the records must show the 130°F-to-80°F and 80°F-to-40°F stages were met.
05Appendix B cooling in V5
Frequently asked questions
Q.What is USDA Appendix B?+
It is the common name for the FSIS Stabilization Guideline for Meat and Poultry Products (Revised Appendix B), guidance on cooling and hot-holding heat-treated meat and poultry to control spore-forming bacteria.
Q.Is FSIS Appendix B mandatory?+
No. It is guidance. Establishments may follow it as scientific support or use other processes supported by their own validated evidence, as required by their HACCP plan.
Q.What are the Appendix B cooling times?+
Under Option 1, product cools from 130°F to 80°F within 1.5 hours and from 80°F to 40°F within 5 hours. Other options apply to different situations; check the current guideline.
Q.When was Appendix B last revised?+
FSIS issued the revised Stabilization Guideline (FSIS-GD-2021-13) in December 2021, replacing FSIS-GD-2017-0007.
Q.What is the difference between Appendix A and Appendix B?+
Appendix A covers lethality (cooking to destroy pathogens such as Salmonella). Appendix B covers stabilization (cooling and hot-holding to prevent spore-formers from growing).
Primary sources
- USDA FSIS — Stabilization Guideline for Meat and Poultry Products (Revised Appendix B), FSIS-GD-2021-13
- Federal Register — FSIS cooking and stabilization guidelines (14 Dec 2021)
- eCFR — 9 CFR 318.17 Requirements for the production of cooked beef, roast beef, and cooked corned beef products
- eCFR — 9 CFR Part 417 HACCP systems
Further reading
- HACCPThe system Appendix B support sits inside.
- Critical Control PointCooling is often a CCP.
- Temperature ExcursionWhat happens when a reading goes out of range.
- Food Safety in V5HACCP plans and live CCP checks.
- Sensors and IoTConnected readings and monitoring records.
- Calibration ManagementCalibration records for monitoring instruments.
- Meat & Sausage ManufacturingHow V5 fits meat plants.
Want to see how FSIS Appendix B could fit into your own records and workflows? Explore the related V5 pages or talk to our team about what applies to your operation.
